Taser C2 Specs
Download original document:
Document text
Document text
This text is machine-read, and may contain errors. Check the original document to verify accuracy.
TASER® C2 SERIES ELECTRONIC CONTROL DEVICE SPECIFICATION Consumer Models Model Model No. TASER C2 WITH LASER 31010 TASER C2 WITH LASER 31040 TASER C2 WITH LASER 31060 TASER C2 WITH LASER 31090 TASER C2 WITHOUT LASER 30010 Specifications 1. Output characteristic7: Wave form: Complex shaped pulse Pulse rate: 17 pulses per second (PPS) for 5 seconds, 12 PPS for 15 seconds, ½ second break, 17 PPS for 1.5 seconds, 8 PPS for remaining 8 seconds Pulse duration: 100 microseconds Peak open circuit voltage: 50,000 volts (V) Peak loaded voltage: 1,200 V Energy at capacitors: Nominal at main capacitors: 0.296 joules per pulse Delivered into load: 0.072 joules per pulse Current: 0.0021 amperes (A) (2 milliamperes average) 2. Power Rating: Nominal at main capacitors: 5 watts Delivered into load: 1.2 watts 3. Temperature Range: -4 °F [-20 °C] to 122 °F [50 °C] 4. Relative humidity: 15% to 80% 5. Housing: High impact polymer 6. Power Source: Lithium Power Magazine (LPM) 4,7 a battery of two three-volt photo cells (Duracell® CR123) Color Black Pearl Electric Blue Titanium Silver Metallic Pink Graphite Features 1. Integrated ultra-bright LED (low intensity illumination). 2. Integrated 650 nm laser (used for target acquisition). Not applicable on 30010. 3. Capable of drive-stun with or without TASER C2 Cartridge installed. 4. Electrical charge can penetrate up to 2″ [5 cm] cumulative of clothing, or one inch per probe. Physical Dimensions1 Length (L) 5.50″ [13.97 cm] Dimensions Height (H) Width (W) 2.10″ [5.33 cm] 1.25″ [3.18 cm] Weight 5.36 oz [151.95 g] Dimensions (With Cartridge and LPM) Length (L2) 6.00″ [15.24 cm] 1. Dimensions are in English [Metric]. 2. Additional terms and conditions may apply (For additional information contact a TASER International sales representative or visit online at www.TASER.com). 3. Product specifications may change without notice; actual product may vary from the picture. 4. Material Safety Data Sheet (MSDS) for lithium battery is available upon request. 5. For additional cartridges, contact TASER International sales representatives. 6. TASER C2 Cartridges available only in 15′ [4.57 m] range. Use of cartridges not authorized by TASER International will void the product warranty. 7. Output specifications may vary dependent upon temperature, battery charge, and load characteristics. 8. Additional models available. Please contact a TASER International sales representative for more information. 9. Duracell® is a registered trademark of P.R. Mallory and Co. 10. C2 is a trademark of TASER International, Inc. All rights reserved. RD-SPEC-C2-001 Rev: A May 15, 2007 TASER International reserves the right to change this specification without notice. Page: 1 of 1